Mountingplate for Hayden inlet valves. Used for the installation of a Hayden inlet valve.

Inlet valve reducer inside for central vacuum pipe systems.

BVC wall inlet pure white plastic, new design with modified lid for better grip of the rubber plate in the lid.

Mounting frame for floor or wall inlet stainless steel. Only suitable for the stainless steel floor or wall inlet with part no. CVF033. Not suitable for our other wall inlets in the range. 

Automatic dustpan original Vacpan® for any central vacuum system. It is made by Plastiflex, one of the leaders in research and development for central vacuum inlet valves, fittings and hose systems. This automatic dustpan is available in 4 colors to choose from. We also offer suitable trim plates should you have the need for one. 

Inlet valve reducer outside for vacuum pipe systems.

O-ring (rubber seal) for mounting frame

Stainless steel faceplate for automatic dustpans that look like the original vacpan. It is made from stainless steel and gives your dustpan that special look.

Cover frame suitable for Hayden White wall inlet.  Dimensions 105 x 150 mm.

Installation kit for 3 wall inlet valves incl. vacuum pipes. With this central vacuum cleaner installation set, the desired wall inlet model can be freely selected. The following wall inlet models are available for selection: VacuValve rectangular, white VacuValve ES square, white Hayden rectangular, white Round lid rectangular, white VEX-S square, white R-VEX rectangular, white In the set, depending on the selected or desired wall inlet, the matching mounting frame is included in each case.  Article number Description Quantity CVF115 PVC Vacuum pipe 2 inch, 115 cm 13 CVF013 Elbow 90° 8 CVF014 Elbow 45° 6 CVF006 Stop Coupler 10 CVF019 Pipe Strap 5 CVF020 24V Low voltage cable 25 m 1 CVF021 PVC Glue 60 ml 1 CVF008 90° Sweep Tee 2 CVF018 Short elbow 90° 3 - Inlet Valve (model selectable) 3 - Mountingframe (model selectable) 3

Installation set for 3 wall inlets without pipes. Suitable for mounting a central vacuum cleaner. To do this, you only need to buy vacuum tubes in the required quantity. This installation kit for the installation of a vacuum cleaner system is ideally suited for the independent installation of a central vacuum cleaner system. The kit comes with installation instructions for central vacuum cleaner installation.  The following items are included in the 3 wall inlet installation set: Wall Inlet (model of your choice), white, 3 pcs. Mounting frame (matching the selected wall inlet), 3 pieces Art.No. CVF018K Safety bend 90° short, 3 pieces Art.No. CVF013 Elbow 90°, 8 pieces Art.no. CVF014 Elbow 45°, 6 pieces Art.No. CVF008 Branch 90°, 2 pieces Art.No. CVF006 Pipe connector, 10 pieces Art.No. CVF019 Pipe clamp, 5 pieces Art.No. CVF020 24 volt control cable 15 M Art.nr. CVF021 Adhesive for vacuum pipes, 60 ml With the practical 3 inlet valve installation set, you have everything you need for the successful installation of a house vacuum system, except for the vacuum pipes.

Suitable installation sets for Retraflex incl. tubes for 1x, 2x or 3x Retraflex hose retraction system with max. 12.2m hose length. Installation Kit for 1x Retraflex Installation set for Retraflex incl. pipes and fittings for 1x Retraflex (or Hide-a-Hose/any other retractable hose system brand) with max. 12.2 M hose length. Article number Description Quantity CVF115 Vacuum pipe 115 cm 13 CVF013 Elbow 90° 8 CVF014 Elbow 45° 6 CVF006 Stop Coupler 10 CVF019 Pipe Strap 5 CVF020 24V Cable low voltage 15 m 1 CVF021 PVC Glue 60 ml 1 CVF008 Sweep Tee 90° 1 ITINSRETN Retraflex Installation Set 1 ITRETPO201 Door Retraflex II White 1 Installation Kit for 2x Retraflex Installation set for Retraflex incl. pipes and fittings for 2x Retraflex (or Hide-a-Hose/any other retractable hose system brand) with max. 12.2 M hose length. Article number Description Quantity CVF115 Vacuum pipe 115 cm 26 CVF013 Elbow 90° 12 CVF014 Elbow 45° 10 CVF006 Stop Coupler 20 CVF019 Pipe Strap 10 CVF020L50 24V Cable low voltage 50 m 1 CVF021 PVC Glue 125 ml 1 CVF008 Sweep Tee 90° 2 ITINSRETN Retraflex Installation Set 2 ITRETPO201 Door Retraflex II White 2 Installation Kit for 3x Retraflex Installation set for Retraflex incl. pipes and fittings for 3x Retraflex (or Hide-a-Hose/any other retractable hose system brand) with max. 12.2 M hose length. Article number Description Quantity CVF115 Vacuum pipe 115 cm 39 CVF013 Elbow 90° 16 CVF014 Elbow 45° 12 CVF006 Stop Coupler 30 CVF019 Pipe Strap 15 CVF020L50 24V Cable low voltage 50 m 1 CVF021 PVC Glue 125 ml 2 CVF008 Sweep Tee 90° 3 ITINSRETN Retraflex Installation Set 3 ITRETPO201 Door Retraflex II White 3

Installationsset für eine Zentralstaubsaugeranlage mit 6 Saugstellen. In diesem Einbau-Set für zentrale Staubsaugeranlagen sind Saugdosen, Montagerahmen, Vakuumrohre, Fittings, Abzweiger, Rohrverbinder, Rohrklemmen, Kleber und Kabel enthalten. Praktisch alles was für den Einbau einer Zentralstaubsauganlage mit 6 Saugdosen in Eigenregie benötigt wird. Folgende Saugsteckdosen-Modelle stehen in diesem Einbau-Set zur Auswahl: Saugdose VacuValve weiß, rechteckig Saugdose VacuValve ES weiß, quadratisch Saugdose Design Nordamerika weiß, rechteckig Saugdose Deckel rund weiß, rechteckig Saugdose VEX-S weiß, quadratisch Saugdose R-VEX weiß, rechteckig Die gewünschte Saugsteckdose ist neben dem passenden Unterputzteil bzw. Montagerahmen im Installationsset für Zentralstaubsauger enthalten. Artikelnummer Bezeichnung Menge CVF115 PVC-Rohr für Vakuumrohrsystem 115 cm 26 CVF013 90° Bogen 16 CVF014 45° Bogen 12 CVF006 Muffe/Rohrverbindungsstück 20 CVF019 Rohrklemmen 10 CVF020L10 Steuerkabel 24 V, 2 adrig 10m 1 CVF020L25 Steuerkabel 24 V, 2 adrig 25m 1 CVF021L 125 ml Spezialkleber für PVC Vakuumrohr 1 CVF008 90° Abzweiger 5 CVF018 90° Sicherheitsborgen  6 - Saugsteckdose (Typ frei wählbar) 6 - Unterputzteil (passend zur Saugsteckdose) 6

This trimplate is suitable for DECO inlet valves that come in stainless look. It is perfect when the opening in the wall is to big.

Installation box for automatic dustpan. Comes with a faceplate in white or brushed steel look. 

Installation Kit for 9 wall inlet valves incl. vacuum pipe. With this central vacuum cleaner installation set, the desired wall inlet model can be freely selected.         The following wall inlet models are available for selection: VacuValve rectangular, white VacuValve ES square, white Hayden rectangular, white Round lid rectangular, white VEX-S square, white R-VEX rectangular, white In the set, depending on the selected or desired wall inlet, the matching mounting frame is included in each case. Article number Description Quantity CVF115 Vacuum pipe 115 cm 39 CVF013 Elbow 90° 24 CVF014 Elbow 45° 18 CVF006 Stop Coupler 30 CVF019 Pipe Strap 15 CVF020L50 24V Cable low voltage 50 m 1 CVF021L PVC Glue 125 ml 2 CVF008 Sweep Tee 90° 8 CVF018 Short elbow 90° 9 - Inlet Valve (Modell selectable) 9 - Mountingplate (suitable for the inlet valve) 9

The floor inlet valve is made of robust metal. Suitable for floor mounting. Dimensions/dimensions: Approx. 13 x 9 cm. Perfectly suited for the Plastiflex mounting frame. In chrome look.